Saturday, November 17, 2012

Setting up to Print from Mac OS X Snow Leopard to a Windows 8 Shared Printer

Whoever says that Mac computers are easy to use are not entirely right! When it comes to troubleshooting a Mac, it is the most painful experience ever. So I needed to configure to print from my MacBook to a Shared Printer that is connected to my newly formatted Windows 8 machine. I am using a HP LaserJet 3015 Printer connected to my Windows 8 machine via USB.

After searching the Internet for awhile, which basically tells you that finding resources for Mac troubleshooting is NOT EASY.. cause there aren't many out there.

I was able to stumble upon a blog post that did what I wanted but for the Windows 7. I figured I would try it and see if it will work since the kernel is somewhat similar.

Tried and worked. Here is the steps I did that followed exactly the blog post here

Windows 8 PC. The place that your shared printer is connected to.

  1. From the Windows 8 Desktop, move your mouse to the bottom right corner, which will bring up the hidden panel.
  2. Click on Settings, then Click on Control Panel
  3. Launch the "Devices and Printers" app
  4. Right Click your shared printer and select "Printer Properties"
  5. Select the Sharing tab and share your printer with a share name WITHOUT ANY SPACES
  6. Click on the Back button to go back to the Control Panel Home screen
  7. Select "Programs and Features"
  8. Click "Turn Windows Features on or off" {its on the left side of the windows}
  9. Expand "Print and Document Services", then select and enable the "LPD Print Service"
  10. Click OK and it should start adding the feature in.


Mac OS X. The place you want to print from.
  1. Open "System Preferences" then select "Print & Fax"
  2. Click "+" to add a printer
  3. Right click anywhere on the tool bar and select "Customize Toolbar" then drag the "Advanced" button to the toolbar
  4. Select "Advanced"
  5. In the "Type:" field select "LPD/LPR Host or Printer"
  6. In the "URL:" field enter lpd://Windows8IPAddress/PrinterShareName; (e.g., lpd://192.168.1.99/HPF4280) Make sure there are no spaces in your printer's share name. Using lpd://Windows8PCName/PrinterShareName does not work, the IP address must replace Windows7ServerName The IP address is the address of your PC, the one assigned by your router. If you need to find out your IP address, go back to your Windows 8 machine, launch Command Prompt, and type in 'ipconfig' in the command prompt window. Hit Enter and it should display your ip address for you.
  7. "Print Using" drop-down list: I was able to select my printer's software from the driver list and it worked (HP Laserjet3015). 
  8. Click the "Add" button
  9. Do a Test Print and it should print ok.
Hope this helps someone. Thanks again Justin for his blogpost

7 comments:

Karen Ford said...

Thank you! I searched for over an hour to find this information. This was a lifesaver!

Emilio said...

Thank you! Finally a solution that works!
Do I need to assign a static IP to the windows 8 machine?

mahasiswa teladan said...

hi...Im student from Informatics engineering nice article,
thanks for sharing :)

mahasiswa teladan said...

hi...Im student from Informatics engineering nice article,
thanks for sharing :)

Tan shuipint said...

谢谢你,好像救世主,帮了我一吧。

Tan shuipint said...

Thank you, trying for 3 days until saw your post,
really help me a lot.

mmm said...

Thank you very much. A few months ago after buying my new Airbook I spent days trying to figure this out and eventually gave up. I finally decided to give it one more try, hoping that there was new information out there. Thankfully I found your article and I was printing from my Airbook to my Windows 8 machine in about 10 minutes.